DeWalt DCD445B 20V MAX* 7/16" Compact Quick Change Stud and Joist Drill w/ FLEXVOLT ADVANTAGE™ (Tool Only)

Stay productive on the jobsite with the 20V MAX* Brushless 7/16 in. Compact Quick Change Stud and Joist Drill with FLEXVOLT ADVANTAGE™. Conveniently swap bits mid-job with little time lost using the 7/16 in. hex quick change chuck. To aid in user control, E-Clutch(R) System shuts the tool down if necessary, in a bind up situation. You can spend less time recharging and more time working as you drill up to 495 7/8 in. holes per charge with the stud and joist drill. This power tool is compatible with DEWALT FLEXVOLT® battery packs, which were designed to enhance your tool's performance and output. Battery and charger sold separately.

FEATURES

• E-Clutch® System shuts the tool down if necessary, in a bind up situation.
• UP TO 83% MORE POWERFUL when using a DCB609 pack**
• QUICK BIT CHANGES with 7/16 in. hex quick change chuck
• CONVENIENCE AND CAPACITY: Drill up to a 4 in. with a Hole Saw and a 2-9/16 in. with a self-feed bit
• TRACK AND LOCATE WITH TOOL CONNECT™ APP: Installing a DEWALT Tool Connect™ Chip allows for monitoring and pinpointing of the drill location on the jobsite
• DESIGNED FOR HIGH PRODUCTIVITY: Drill up to 495 holes with a 7/8 in. auger bit on a single charge***

SPECIFICATIONS

• CHUCK SIZE 7/16 IN.
• CHUCK TYPE HEX
• E-CLUTCH(TM) TRUE
• MOTOR TYPE BRUSHLESS
• NO LOAD SPEED 0 - 1250 RPM
• POWER TOOL TYPE CORDLESS
• SYSTEM 20V MAX* 
• TOOL HEIGHT 6.8 IN
• TOOL LENGTH 16.3 IN
• TOOL TAG READY TRUE
• TOOL WEIGHT 8.6 LBS 
• UNITS WATTS OUT 1800

INCLUDES

• (1) DCD445 20V MAX* Compact Quick Change Stud and Joist Drill