GearWrench 82306 27 Piece Punch and Chisel Set

27 Pc. Punch and Chisel Set

• Center Punch For Marking Center Lines and Pilot Drill Locations
• Long Taper Punch To Install and Remove Pins and Shafts and To Align Holes
• Starter Punch For Both Starting and Installing Pins and Rivets
• Chisel For Cutting Rivets, Bolts, and Nuts
• Pin Punch For Final Removal To Drive Out Pins and Rivets

What's Included:

• 1/4" x 4-3/4" x 1/4", 3/8" x 5" x 5/16", 7/16" x 5-1/2" x 3/8", 1/2" x 6" x 3/8", 5/8" x 6-1/2" x 3/8", 3/4" x 7" x 5/8", 7/8" x 7-1/2" x 3/4", 1" x 8" x 7/8" Cold Chisels
• 1/4" x 4-1/4", 3/8" x 5", 7/16" x 5-1/2" Center Punches
• 3/32" x 4-3/4" x 5/16", 1/8" x 5" x 5/16", 5/32" x 5-1/4" x 5/16", 3/16" x 5-1/2" x 5/16", 1/4" x 7" x 3/8", 5/16" x 7" x 1/2" Pin Punches
• 1/8" x 8" x 3/8", 5/32" x 8-1/2" x 1/2", 3/16" x 9" x 1/2", 1/4" x 11" x 5/8" Long Taper Punches
• , 5/32" x 5" x 3/8", 3/16" x 5" x 3/8", 1/4" x 6" x 1/2", 1/8" x 4-1/2" x 5/16", 5/16" x 7" x 5/8", & 3/8" x 8" x 3/4" Starter Punches